Connect with us

Hi, what are you looking for?

Latest

Create a bootable USB drive by simply copying the ISO to the Ventoy USB (Linux and Windows)

 

Create a bootable USB drive by simply copying the ISO to the Ventoy USB (Linux and Windows)

Ventoy is a reasonably new open supply instrument to create bootable USB drives utilizing Linux or Microsoft Home windows ISO information. You put in this instrument to a USB drive, then merely copy some ISO information to the USB drive and you may boot from it with no different modifications (so with out having to reformat the USB drive each time you need to create a bootable USB drive, and with out having to extract the ISO file contents).

The appliance is offered for Microsoft Home windows and Linux. It has a graphical consumer interface on Home windows solely; on Linux you will want to make use of it from the command line.

When copying a number of ISO information to the USB drive, Ventoy offers a menu on boot from the place you may select which ISO besides. You possibly can even create a multiboot USB drive by including ISO information for some Linux distributions and Home windows ISO information on the identical USB, as seen within the screenshot on the prime of this web page.

It is value noting that you may proceed to make use of the USB stick for different functions. As soon as Ventoy is put in on an USB drive, that USB drive can be utilized besides ISO information that you just copy to it, however it’s also possible to copy different information to it, and that will not have an effect on the operation of Ventoy.

To benefit from the entire USB drive for different functions, you do not have to format it. Delete all ISO information from it and use it as a daily USB drive (Ventoy solely takes a number of MB of area and isn’t seen when mounting the USB drive). Whenever you need to use this identical USB drive besides an ISO, all it’s important to do is copy the ISO file (or a number of ISOs) to the USB and boot from it.

Ventoy comes with each legacy and UEFI Safe Boot assist, and it has been examined with greater than 260 ISO information, together with Debian, Ubuntu (and its flavors), CentOS, RHEL, Deepin, Fedora, SLES, openSUSE, MX Linux, Manjaro, Linux Mint, Elementary OS, Pop!_OS, Solus OS, Zorin OS, Arch Linux, Pet Linux, Tails, Slax, Kali Linux, Mageia, Slackware, Gentoo, NixOS, ALT Linux, KDE Neon, and plenty of different Linux distributions, in addition to Home windows 7, Home windows 8 / 8.1, Home windows 10, and Home windows Server 2012 / 2012 RS, 2016 and 2019.

Different Ventoy options:

  • Persistence assist for Ubuntu, MX Linux, Linux Mint, Elementary OS and Zorin OS
  • Auto set up – this could work with Home windows and any Linux distribution that assist automated set up, but it surely has solely been examined with RHEL7/CentOS7/Fedora, Debian/Ubuntu Server and SUSE
  • WIM information boot supported (Legacy + UEFI)
  • Helps ISO information bigger than Four GB
  • Improve the Ventoy set up on the USB drive with out formatting the USB

Learn on to see the right way to set up Ventoy on an USB drive (from Microsoft Home windows or Linux) and the right way to create a bootable USB drive with persistence utilizing Ventoy.

Bootable USB drive-related:

 

Obtain and set up Ventoy on an USB drive

The obtain button above hyperlinks to Ventoy binaries for Microsoft Home windows and Linux. Should you want to construct it from supply as an alternative, see this web page.

On Home windows, Ventoy comes with a graphical consumer interface so utilizing it’s fairly straight-forward. To make use of it, extract the downloaded Ventoy .zip file, then launch the Ventoy2Disk executable.

Create a bootable USB drive by simply copying the ISO to the Ventoy USB (Linux and Windows)

Select the USB drive from the Machine listing, optionally allow Safe Boot assist (from the Choice menu), then click on the Set up button to put in Ventoy to the USB stick. Now that Ventoy is put in in your USB drive, you may create a bootable USB drive by merely copying some ISO information onto the USB, irrespective of if they’re Linux distribution ISOs or Home windows 10 / 8 / 7 ISO information.

On Linux, extract the Ventoy .tar.gz file and you will find Three folders in addition to 2 scripts, Ventoy2Disk.sh for putting in Ventoy on an USB drive, and CreatePersistentImg.sh for making a persistent picture to make use of with Ventoy.

However earlier than putting in Ventoy on an USB drive and making a bootable USB drive, it is advisable to discover out the system title of this USB drive, and unmount it if it is mounted. Observe the steps beneath to do that, after which set up Ventoy on an USB drive on Linux.

1. Discover out the USB drive system title and out there partitions

Plug-in the USB into your laptop, then run the next command (it’s also possible to use lsblk or sudo fdisk -l as an alternative; or use Gparted if you happen to favor a GUI) in a terminal:

sudo parted -l
This could output the disks and partitions hooked up to your laptop, together with the USB drive. You will want to determine which one of many units listed is your USB drive, primarily based on the mannequin title, disk dimension, and so on.

Instance with the parted -l command exhibiting an USB drive hooked up to my laptop:

sudo parted -l
……………………..
Mannequin: USB DISK 3.Zero Professional (scsi)
Disk /dev/sdd: 31.0GB
Sector dimension (logical/bodily): 512B/512B
Partition Desk: msdos
Disk Flags:

Quantity Begin Finish Measurement Kind File system Flags
1 1049kB 31.0GB 30.9GB major boot
2 31.0GB 31.0GB 33.6MB major fats16 esp
On this instance output you will discover the USB system title by trying underneath Disk, so in my case, it is /dev/sdd.

The partitions are listed beneath the Disk Flags, so on this instance there are 2 partitions: 1 and a pair of (because the system title is /dev/sdd, the partitions are /dev/sdd1 and /dev/sdd2).

2. Unmount any mounted USB drive partitions

In case the USB drive has mounted partitions, unmount them earlier than continuing (or else you will not be capable of set up Ventoy on the USB, and that is required for making a bootable USB drive) by opening a terminal and utilizing this command:

sudo umount /dev/sdXN
Substitute /dev/sdXN with the USB system partitions. Make certain to unmount all mounted disk partitions.

In my instance, the USB drive system title is /dev/sdd, and its partitions are /dev/sdd1 and /dev/sdd2, so in that case the instructions to unmount them could be:

sudo umount /dev/sdd1
sudo umount /dev/sdd2
3. Set up Ventoy on the USB disk

It is essential to notice that each one the info on the disk the place you put in Ventoy will likely be misplaced! Make certain the USB system title is appropriate so you do not unintentionally lose the info from a tough drive.

To have the ability to create bootable USB drives by merely copying the ISO information onto the USB, you will want to put in Ventoy on the USB drive. Open a terminal and navigate to the folder the place you have extracted Ventoy (the folder which accommodates the Ventoy2Disk.sh script).

Then to put in Ventoy on the USB disk with out Safe Boot assist, use:

sudo ./Ventoy2Disk.sh -i /dev/sdX
Or, to put in Ventoy on the USB disk with Safe Boot assist, use:sudo ./Ventoy2Disk.sh -i -s /dev/sdX
In each of those instructions it is advisable to substitute /dev/sdX with the USB system title that you just came upon in step 1.

You’ll be requested to verify if USB system title is appropriate twice – sort y and press the Enter key to proceed.

Instance:

sudo ./Ventoy2Disk.sh -i -s /dev/sdd

***********************************************************
* Ventoy2Disk Script *
* longpanda [email protected] *
***********************************************************

Disk : /dev/sdd
Mannequin: USB3.Zero DISK (scsi)
Measurement : 31 GB

Consideration:
You’ll set up Ventoy to /dev/sdd.
All the info on the disk /dev/sdd will likely be misplaced!!!

Proceed? (y/n)y

All the info on the disk /dev/sdd will likely be misplaced!!!
Double-check. Proceed? (y/n)y

Create partitions on /dev/sdd by parted …
Completed
mkfs on disk partitions …
create efi fats fs /dev/sdd2 …
mkfs.fats 4.1 (2017-01-24)
success
mkexfatfs 1.3.0
Creating… completed.
Flushing… completed.
File system created efficiently.
writing information to disk …
sync information …
esp partition processing …

Set up Ventoy to /dev/sdd efficiently completed.
Now that Ventoy is put in in your USB drive, you may create a bootable USB drive by merely copying some ISO information onto the USB, irrespective of if they’re Linux distribution ISOs or Home windows 10 / 8 / 7 ISO information. 

Boot from this USB drive and you may see a listing of ISO information which might be out there on it – click on any of them and you may boot the chosen ISO file with the potential of putting in the Linux distribution or Home windows model you have copied to the USB drive.

The best way to create a bootable USB drive with persistence utilizing Ventoy

Whenever you create a daily Linux reside USB, you may set up software program, obtain information, make modifications to the system, and so forth, however all of those modifications are misplaced after a reboot. A persistent reside USB permits saving any modifications you make to the reside system, so they’re nonetheless current the following time you boot to it.

Ventoy helps creating bootable USB drive with persistence assist. Among the many Linux distributions for which Ventoy helps persistence are Ubuntu, MX Linux, Linux Mint, Elementary OS and Zorin OS, though extra most likely work, however have not been examined. Typically, any Linux distribution primarily based on Ubuntu ought to work.

The next directions assume you have already downloaded, extracted and put in Ventoy on an USB system (see the directions above). It is value noting that this requires the CreatePersistentImg.sh script, solely out there with the Ventoy Linux obtain (there is not any related answer out there with Ventoy for Home windows).

1. Create a persistent picture file

To create a persistent bootable USB drive, step one is to create the backend picture file. This can be a easy disk picture with a label. You need to use the CreatePersistentImg.sh script, out there within the folder the place you have extracted Ventoy for Linux, to create this picture file.

Open a terminal, navigate to the folder the place you have extracted Ventoy (which ought to comprise the CreatePersistentImg.sh script), and run this command to create a picture file with the dimensions of Four GB:

sudo ./CreatePersistentImg.sh -s 4096
This creates a Four GB EXT4 picture file with a default label of casper-rw. 4096 represents the dimensions of the picture file in MB, if you wish to enhance or descrease the dimensions, change this quantity.

You possibly can see all of the out there choices by working:

./CreatePersistentImg.sh –help
2. Copy the persistent picture file to the USB drive

The created picture file known as persistence.img, and it ought to be out there within the Ventoy folder (subsequent to the CreatePersistentImg.sh script). Plug-in the USB stick on which you have put in Ventoy, and replica this persistence.img file to the USB drive.

3. Create a Ventoy json configuration file containing the paths to the ISO and persistence information

On the USB drive on which you have put in Ventoy, create a folder referred to as ventoy. Inside this folder create a file referred to as ventoy.json, and open this file with a textual content editor.

Contained in the file, paste this:

{
“persistence” : [

“picture”: “/ISO-file-name.iso”,
“backend”: “/persistence.img”

]
}
Substitute ISO-file-name.iso with the ISO filename (and path if it isn’t within the root of the USB), and persistence.img with the persistence picture filename and path (in case you have modified the title and did not place it within the root of the USB).

For instance, when you have an ISO referred to as ubuntu-20.04-desktop-amd64.iso and a persistence picture file referred to as persistence.img, each positioned within the root of the USB drive (within the lowest-level listing, the one which opens whenever you click on on the USB drive icon), the ventoy.json file would appear like this:

{
“persistence” : [

“picture”: “/ISO-file-name.iso”,
“backend”: “/persistence.img”

]
}
You possibly can add a number of ISO information with persistence if you want, for instance:{
“persistence” : [

“picture”: “/ISO-file-name.iso”,
“backend”: “/persistence-ubuntu-20.04.img”
,

]
}
Make certain the paths and syntax are 100% appropriate. Should you miss (or have an additional) comma for instance, or if the paths should not appropriate, the persistence will not work.

For extra on this, see the Ventoy persistence documentation.

Create a bootable USB drive by simply copying the ISO to the Ventoy USB (Linux and Windows)

Whenever you’re completed, save the file and boot from this USB drive. After clicking on the ISO for which you have added persistence, you will see a menu that allows you to boot with or with out persistence, like proven within the screenshot above.

h/t: conductor on HN

mini windows 7 bootable iso download,download ventoy for linux,ventoy persistence,new linux update,ventoy usb,linux online magazines,usb multiboot ventoy,latest linux update

You May Also Like

Hosting

Introduction In previous articles we have talked about images of dockers, the origin and functioning of dockers and the dockers’ hub. In this document...

Latest

Linux desktops are good in many ways, but like Windows they are not known as the most efficient battery. This does not mean that...

Latest

The United States Supreme Court has indicated that it will finally solve a problem that has been causing legal problems for almost two decades:...

Hosting

To secure your AWS assets, follow these AWS Identity and Access Management (IAM) guidelines. Locking the Root User Access Key for AWSAccount You use...